HAMMAR - USA

Untitled Document

	190-Series

	Products/190-Series

The latest addition to the HAMMAR family. With a lifting capacity of 72.000 lbs, with the 190 versatile support legs. These models are available on a gooseneck chassis as non stacking models only. The 195 crane can handle containers from ground to ground as well as transfer containers to and from other chassis. It has a low tare weight for a maximum payload and a two axle HAMMAR 195 S have an empty weight starting on only about 19.700 lbs. With the four types of chassis, one S and three C trailers HAMMAR Lift offers, the customer can optimise his sideloader to completely meet his needs.
HAMMAR 190 series was developed to satisfy increased handling requirements and to provide high lifting capacity without reduction in payload. The cranes and their stabilisers have been developed for both vehicle mounting and semi-trailer integration. It is today becoming the most popular and sold HAMMAR model.

Brochure

Suitable for Chassis: S and C.

	The hydraulic cylinders together forms the heart of the crane. Our own design highest quality. Hollow lifting cylinders with impressive diameter and still low weight.
	The hoses and wires move inside a protective casing which can easily be opened when replacing a hose. This makes your maintenance easier.
	All hydraulic cylinders are connected with hinged bearings. Eliminates damages in movements and gives straight loads.
	The versatility of the stabilisers gives numerous possibilities, from a reach of 1,9 metres for lifting heavy containers to vertical placing when handling empty ones. Always in complete safety.
	Transfer to and from other chassis can be done quickly, simple and safe. If the tractor can be jack-knifed the un hooking is unnecessary.

The most common lifting situation. To or from the ground in only three and a half minutes.

Lifts to and from rail wagons are simple. The versatile stabilisers, with their low foot pressure, can rest both on the ground or on the wagon.

Untitled Document

Legal